Leica GR10, Руководство по эксплуатации

Страница: 191 / 317

Printed Documentation
Receiver setup: FTP server
Background Information
The FTP server configuration page is used to enter the necessary information for accessing the receivers FTP server
(SD card). The FTP server can also be accessed via a TCP/IP connection over USB cable. The settings for this
connection are hard wired. For more information on setting up a USB connection, see Setup via Web Interface over
USB .
Mozilla Firefox does not support the use of certain ports. Use a different internet browser if these
ports need to be used. Ports blocked by default in Mozilla Firefox browser .
Setting Descriptions
The table below describes the fields in the FTP server page.
Setting Description
Enable access to FTP server
Turn the FTP server on or off on the receiver. If disabled, FTP
access to the receivers SD card is not possible.
Allow anonymous access
Activate to allow read only access to anonymous users.
FTP control port
Enter the TCP/IP port where the FTP server listens for incoming
connections. Default: 21
FTP data port range
Enter the TCP/IP port range used for data transfers.
Default:
50000 - 51000
Session timeout
Select the time in seconds after which the FTP sever drops
inactive connections.
Default:
180
A maximum of 6 simultaneous connections is possible on the
GR10 FTP server.
Restore default values
Press to fill the form with factory default settings and store.
The restore default button fills all fields with the
default values and stores these values.
Pressing the save button is not necessary.
When accepting the confirmation message, all
settings on this page are overwritten with the
default settings.
Press the save icon to store the settings.
Related topics
Setup via Web Interface over USB
190