Leica GR10, Руководство по эксплуатации

Страница: 124 / 317

6: Context sensitive help
Incoming data stream wizard: Configure Meteo
Background Information
Meteorological sensors are used for measuring air pressure, temperature and relative humidity. The data from the
meteo sensor is logged together with the GPS raw observations into the MDB and RINEX files. If RINEX logging is
active, an additional meteo RINEX file is created that contains the data from the meteo sensor.
Data is logged into the same file as the GPS raw observations (MDB) or into a file with the same file name but with
the extension m (RINEX). No data is logged, unless raw observation logging is configured and a logging session is
started.
Setting Descriptions
The table below describes the settings that can be configured on the Configure Meteo device page.
Setting Description
Device
Select from the list box all available meteo sensors available on the receiver.
Data rate
Select the rate at which data is requested from the meteo sensor.
The following default settings are used for communication between the Meteo device and
receiver.
Met3, Met3A, Met4A default communication settings
Communication
setting Default setting
Port name
Seria l Port (P1).
Baud rate
9600
Parity
Even
Data bits
8
Stop bit
1
Flow control
No handshake. The handshake used between the receiver and the tilt device.
Vaisala PTU300 default communication settings
Communication
setting Default setting
Port name
Seria l Port (P1).
Baud rate
4800
Parity
Even
Data bits
7
Stop bit
1
Flow control
No handshake. The handshake used between the receiver and the tilt device.
Press to go back to the previous wizard step. Press to continue to the next wizard step.
Press to cancel and return to GNSS management: Incoming data streams .
123