Leica GR10, Руководство по эксплуатации

Страница: 43 / 317

Printed Documentation
Tracked L1
Tracked SBAS satellites on B1.
Tracked L2
Tracked SBAS satellites on B2.
The table below describes the icons used in the Tracking box.
Icon Description
No position
, indicates that no navigated position is available. This is displayed after
a reboot when the receiver has not started tracking yet. Check that an antenna
cable is connected.
Navigated
, indicates that a navigated position is available but the configured
reference position is more than 100m away from the navigated position. An error
message is displayed in the event log.
User action:
Check the configured reference position.
Navigated position available.
Indicates that the satellite system is activated and the receiver
is
tracking satellites.
The number of currently tracked satellites is shown.
Indicates that the satellite system is activated but the receiver is
not
tracking.
Indicates that the satellite system is not activated.
Internal
- this receiver is configured to use the internal receive clock (default
setting).
TCXO, OCXO, Rubidium, Cesium
- The receiver is configured to use the listed
external oscillator. If an external oscillator is configured connected, the receiver will
not be able to track any satellites.
Status: Event log
The Event log box shows the latest eight messages from the Status / Event log page. The Event log box is
updated every 5 seconds.
Icon Description
Information message.
User action:
No action is required from the user.
Receiver message.
User action:
A change in the receiver operation has occurred. Check that this was
an intended change.
Warning message.
User action:
Receiver warning message, an action is required from the user.
42