Leica GR10, Руководство по эксплуатации

Страница: 53 / 317

Printed Documentation
Install USB drivers for Windows XP operating systems
Follow these steps to install drivers for Windows XP operating systems for the first time:
Step Description
1
Turn on the GR10.
2
Start the computer.
3
Insert the Leica GR10 DVD.
4
Run the installer executable depending on your CPU and operating system to install the drivers
necessary for your GR10.
•
32 bit CPU: SetupViva&GR_USB_32bit.exe
•
64 bit CPU: SetupViva&GR_USB_64bit.exe
•
Itanium 64 bit CPU: SetupViva&GR_USB_64bit_itanium.exe
5
The Welcome to the InstallShield Wizard for Leica Viva & GR USB drivers window appears.
Make sure that all GR10 or Viva devices are disconnected from the PC.
6
Click
Next>
.
7
The
Ready to Install the Program
window appears.
8
Click
Install
. The drivers will be installed on your computer.
9
Click
Continue Anyway
every time a window pops up saying that the software has not passed
the Windows Logo testing.
10
The
InstallShield Wizard Completed
window appears.
11
Read the instructions and check the box,
I have read the instructions
. These instructions are
listed in detail in the following steps.
12
Click
Finish
to exit the wizard.
13
Click
Yes
to restart the system so all changes take effect.
For Windows XP users with Service Pack 3: Windows does not require a restart.
14
Loosen the screw on the SD card/USB port cover.
15
Open the SD card/USB port cover.
16
Plug the USB cable into the USB port on the GR10.
17
Plug the USB cable into the USB port of the computer.
18
Wait until the new hardware wizard starts up automatically. Select,
No, not this time
and click
Next>
.
It can take some time for the wizard to start.
19
Click
Next>
to install the software automatically.
20
Click
Continue Anyway
when a window pops up saying that the software has not passed the
Windows Logo testing
21
Click
Finish
to exit the wizard.
22
Another Found new hardware wizard starts up automatically. Select,
No, not this time
and click
Next>
.
23
Click
Next>
to install the softw re automatically. a
24
Click
Finish
to exit the wizard.
Windows will show searching for IP address. Ignore this and go to the next step.
25
Run shortcut
Configure GR connection
which has been created on the Windows desktop.
52