OMEGA
Installation Manual
Edition February
2020
Omega
platform lift
page 12 of 52
Installing the support rope
Feed the support rope into the lower tube and make sure the tension rope engages
well into the motor drive wheel. Make sure you put some cover on the lower floor so
the support rope does not get dirty when it gets out on the lower tube end.
Enter the lower rope into the over speed governor tube section. It might be necessary
to release the tension spring in order to facilitate entry of the rope into the safety gear
tube section. This spring later should be set to the same tension again after the rope
is installed!
The teeth of the wheel
have to engage into
the
metal
elements of
the support rope
Tension spring
