manualshive.com logo in svg

LEGRAND 422684, Инструкция по установке и эксплуатации, Страница: 15 / 48

Поделиться
Скачать
LEGRAND 422684 Скачать руководство пользователя страница 15

Three-Sources Management System 

(T.S.M.S.)

Installa

tion and user manual

15

2.14 

Keypad lock

•  The keypad of the ref. 422684  can be locked by means of:

  - a programmable digital input.

  - a particular front button procedure.

•  The message ACCESS LOCKED will appear when attempting to use the locked buttons.

• Press 

▲

 and hold it pressed to lock or unlock the keypad. Press 

▼

 three times without releasing it at the end.

•  Then release 

▲

 and press it five more times. Then release both buttons.

•  The message KEYPAD LOCKED will appear on the display when the keypad is locked. The message KEYPAD UNLOCKED 

will appear when it is unlocked, instead.

2.15 

IR programming port 

•  The  ref. 422684 parameters may be configured by means of the front optical port using the IR-USBprogramming don-

gle or the IR-WiFi dongle. 

•  Simply approach a CX.. dongle to the front port and insert the plugs in the specific holds to obtain the mutual recogni-

tion of the devices as indicated by the green LINK LEDs on the programming dongle.

            

USB Dongle andWiFi Dongle

2.16 

Parameter setting  from  PC 

• The configuration and remote monitoring software 

ACU Configurator

  can be used to transfer the set-up parameters 

(previously set) from  ref. 422684422684 to the PC hard disk and vice versa. 

•  Parameter transfer from PC to  ref. 422684  3 source management may be partial, i.e. only the parameters of the specified 

menus.

 

2.17 

Parameter setting from smartphone or tablet with WIFI DONGLE

• It is possible to connect to the  ref. 422684   by means of the app ACU configurator, available for tablet and Android or 

iOS smartphones, and the CX02 accessory.

• The app can be used to view alarms, send controls, read measurements, set parameters, download events and sent 

collected data via e-mail.

Содержание 422684

















































Отзывы:

Нет отзывов