ruby standard configuration User Manual
Version: 6.4.0/2
120/179
9. The Web UI
9.3
The System Menu
There are eight informational tabs in the System menu. Most of these tabs are status displays for the main unit
and its peripherals. Values which can be modified are noted for each tab.
9.3.1
Information Tab
The
Information
tab is the first tab to be shown following a successful login. It displays basic data such as the
unit’s serial number, software / firmware version numbers, and system date and time. In User mode, all fields
are non-editable. Entering Supervisor mode permits editing of the time zone.
If the unit has not yet been configured, then the project name and description will be a default description. After
configuration, these fields display the information entered using the ON-AIR Designer software.
The system date and time is provided by your network’s NTP server. If an NTP server is not present, then the
internal Real Time Clock (RTC) is used. This can be reset using SoP Explorer as described
.
Setting the Time Zone
By entering Supervisor (or Administrator) mode you can edit the current
Time Zone
value - any change takes
immediate effect without needing to restart.
The time zone should be specified relative to Central European Time (CET).
For example, "CET+5CEST,M3.2.0/2:00,M11.1.0/2:00" is suitable for US East Coast, where CET is 5 hours
ahead.
The second part of the syntax specifies the start and end of Central European Summer Time (CEST). e.g. from
month 3, week 2, day 0, time 2am (the second Sunday in March) until month 11, week 1, day 0, time 2am (the
first Sunday in November).