LAWO mc266, Руководство

Страница: 68 / 68

Tutorial
mc²66 V1.3/0 69/ 68
Assigning the Fader Strip Free Controls
On each channel fader strip are four, and on each main fader
strip two, assignable Free Controls. These provide local channel
access to settings such as EQ, Panning, Dynamics, Auxiliary
Sends, etc.
Each control is touch sensitive and when turned provides fine
control. Push down and rotate the control for coarse adjustment
of a parameter value.
Each control also has its own dedicated 4-character alphanumeric
display. The normal mode shows the parameter function (e.g.
EQ1G – EQ Band 1 Gain) until the control is touched, when the
display then updates to show the parameter value (e.g. +12).
There are three ways you may assign parameters onto the free
controls, but to get you started let’s use the global FC PRESET
buttons located to the left of the Central Control Section.
1. Check that the Page 2 button is turned off.
2. Press the EQ 1/FI 1 button.
Working up the channel, the four free controls are now
assigned to On/Off, Gain, Frequency and Q for band 1 of the
Equaliser section. The value of the parameter is shown in the 4-
character display below the control as it is adjusted.
If a control is assigned to a switched function, such as EQ
On/Off, turn the rotary control clockwise to activate the
function (EQ On) and anticlockwise to deactivate the function
(EQ Off).
3. To access the second level of functions, for example, the
Filter controls, press the PAGE 2 button.
Congratulations on completing this tutorial! Hopefully, we have
given you enough information to being working with the
console immediately. If you need more assistance, use the Index
Directory located at the back of the manual to locate
information on a particular topic. Otherwise keep reading to
learn more about each area of the console’s operation.