LAWO mc266, Руководство

Страница: 59 / 68

Tutorial
60/ 68 V1.3/0
Assigning Channels to a VCA Master
Let’s assign our CD player, on input channels 23 and 24 to VCA
master 1:
1. Press the fader SEL button on the fader strip controlling
VCA 1.
This puts VCA 1 into access as indicated on the ACCESS
CHANNEL/ASSIGN control panel’s CHANNEL and LABEL
displays.
2. Now press the VCA button, located on the BUS
ASSIGNMENT panel.
The VCA button flashes to indicate that it is active, and across
the console the fader SEL buttons flash, in green, to indicate
possible sources for your chosen master:
3. Now press the SEL buttons on the fader strips controlling
input channels 23 and 24.
The fader SEL buttons stop flashing and change colour from
green to red to indicate that the channels are assigned to the
selected VCA master. On each assigned channel, the VCA
master number is shown in the figure of eight display.
4. Deselect VCA, on the BUS ASSIGNMENT, panel or press
ESC, on the ACCESS CHANNEL/ASSIGN control panel, to
exit the VCA set up mode.
Fader Strip