LAWO mc266, Руководство

Страница: 18 / 68

Tutorial
mc²66 V1.3/0 19/ 68
There are three ways in which you can modify the channel in
access providing that the LOCK ACC (lock access) button is not
selected:
1. Press the SEL button on a channel or main fader strip.
This is the simplest method for accessing channels on the active
control surface. However, there are times when you will wish to
access channels on an underneath bank or layer of fader strips.
In these cases, you may use either method 2 or 3 as follows:
2. Select the channel type and number using the channel
type selection buttons and numeric keypad:
•
Select a channel type by pressing one of the following:
ο
INPUT – Input channels (up to 384).
ο
MON – Monitor channels (up to 96).
ο
AUX – Auxiliary masters (up to 32).
ο
GPC – General Purpose Channels (up to 256).
ο
GROUP – Group masters (up to 48).
ο
TRK – Track busses (up to 96).
ο
SUM – Sum masters (up to 48).
ο
VCA – VCA masters (up to 16).
ο
MAIN FADER – selects the channel type as
assigned to one of the 8 main fader strips.
ο
STRIP – selects the channel type as assigned to
one of the channel fader strips.
The channel type button flashes and buttons on the numeric
keypad illuminate; the flashing TYPE NUM message is guiding
you to enter a number.
•
Enter the channel number by pressing a number on the
numeric keypad followed by the Enter button. For
example, press 1, 2 and Enter to enter the number twelve.
•
Alternatively, enter a three digit number. For example,
pressing 0, 1, and 2 will also enter the number twelve.
Having entered a valid number, the channel type button stops
flashing and the displays update to show the name and label for
the selected channel.
If you try and enter an invalid selection, for example GRP 897,
the CHANNEL display tells you by flashing the letters
NOTAVAIL for ‘Not Available’. Press the ESC button to exit the
operation, and start again.
Note