LAWO mc266, Руководство

Страница: 48 / 68

Tutorial
mc²66 V1.3/0 49/ 68
Now, we need to assign input channels 1-8 to one of the groups
– let’s use Group 1:
1. Select the destination (Group 1) by pressing the SEL
button on the main fader strip controlling GRP 1:
This puts GRP 1 into access as indicated on the ACCESS
CHANNEL/ASSIGN control panel’s CHANNEL and LABEL
displays.
2. Now press the INPUT button, located on the BUS
ASSIGNMENT: REVERSE panel.
The INPUT button flashes, and across the console the fader SEL
buttons on fader strips which are controlling input channels
(INP 1-24) flash, in green, to indicate possible sources for the
chosen destination:
3. Press the fader SEL buttons on the fader strips controlling
INP 1 to INP 8 to complete the assignment.
The fader SEL buttons stop flashing and change colour from
green to red to indicate that the channels are assigned to the
selected destination. Note also that the Channel display above
fader strips 1 to 8 shows the bus assignments onto group 1.
4. Deselect the INPUT button or press ESC, on the ACCESS
CHANNEL/ASSIGN control panel, to exit the bus assign
mode.