LAWO mc266, Руководство

Страница: 65 / 68

Tutorial
66/ 68 V1.3/0
Inserting Channel Delay
To apply delay to a channel, for example to compensate for
video processing delays:
1. Locate the DAMP/DELAY/INS/DIROUT panel on the
Central Control Section.
2. Press the DLY button to assign the controls to the channel
delay audio module.
3. Press the ON button to switch the delay into circuit.
4. Toggle the MODE button to cycle around the channel
delay unit options – milliseconds (ms), frames (frms) or
meters (m).
The TIME box on the Main display updates to show your
chosen units.
5. Move the rotary control to adjust the delay value.
The amount of delay is displayed in the TIME box on the Main
display. Channel delay may be set from 0 to 1800ms (or 612m
or 45 frames).
Inserting Outboard Processing
To insert an outboard piece of equipment into the channel path,
for example to apply external compression:
1. Press the INS button on the DAMP/DELAY/INS/DIROUT
panel to assign the controls to the channel insert module.
2. Press the ON button to switch the insert return into
circuit.
If an insert return is not assigned, you will get silence when you
switch the insert into circuit.
3. With the insert ON, adjust the rotary control to set the
level of the insert send.
The SEND level is shown on the Main display and may be
adjusted from -128dB to +15dB.
Central Control Section
Main Display
Central Control Section
Main Display