LAWO mc266, Руководство

Страница: 36 / 68

Tutorial
mc²66 V1.3/0 37/ 68
Bus Assignments
Next we need to assign input channels 23 and 24 onto our main
output (SUM 1). We may use either forward or reverse bus
assign to perform this operation; let’s use reverse bus assign:
1. First select the destination (Sum 1) by pressing the SEL
button on the main fader strip controlling SUM 1 – main
fader strip eight:
This puts SUM 1 into access as indicated on the ACCESS
CHANNEL/ASSIGN control panel’s displays.
2. Now press the INPUT button, located on the BUS
ASSIGNMENT: REVERSE panel.
The INPUT button flashes, and across the console the fader SEL
buttons on fader strips which are controlling input channels
(INP 1-24) flash, in green, to indicate possible sources for the
chosen destination:
3. Press the fader SEL buttons on the fader strips controlling
IN23 and IN24 to complete the assignment.
The fader SEL buttons stop flashing and change colour from
green to red to indicate that the channels are assigned to the
selected destination. Note also that the Channel display above
fader strips 23 and 24 shows the bus assignments onto sum 1.
4. Deselect the INPUT button or press ESC, on the ACCESS
CHANNEL/ASSIGN control panel, to exit the assign mode.