LAWO mc266, Руководство

Страница: 58 / 68

Tutorial
mc²66 V1.3/0 59/ 68
Using VCA Grouping
A common application for the eight main fader strips is to use
them as VCA group masters. The console supports up to 16
dedicated VCA masters and you may assign any number of
fader strips to a dedicated VCA. This provides the ability not
only to control input and monitor channels but also groups,
sums and auxiliary masters.
Assigning VCA Masters to the Control Surface
As we have already assigned groups 1 to 4 and sum 1 onto the
first layer of our eight main fader strips, let’s use the second
layer to create eight VCA masters:
1. Bring the second layer of main fader strip onto the active
surface, by pressing the MAIN 2ND button, located on
the LAYER access panel.
2. Now select VCA master 1 from the ACCESS
CHANNEL/ASSIGN control panel, by pressing VCA, the
number 1 and the Enter button.
The CHANNEL and LABEL displays show the name (VCA 1) and
user label for the master.
3. Select the FIRST LAST button, located on the STRIP
ASSIGNMENT: ASSIGN MODES panel.
This automatically selects the global ASSIGN button, and across
the console the fader SEL buttons flash, in green, to indicate
possible destinations for your selected channel.
4. Press the fader SEL button on the first main fader strip
followed by fader SEL on the last main fader strip.
The console assigns VCA masters 1 to 8 to main strips 1 to 8.
5. Deselect the global ASSIGN button or press ESC, on the
ACCESS CHANNEL/ASSIGN control panel, to exit the
assign mode.