LAWO mc266, Руководство

Страница: 30 / 68

Tutorial
mc²66 V1.3/0 31/ 68
To switch between layers within a bank:
1. Press the 2ND button located on the fader strip to switch
an individual strip.
The fader’s label, control positions and Channel display update
to reflect the settings for the second layer. If there is nothing
assigned to this layer, then you will switch to a blank fader strip.
2. Alternatively, locate the four LAYER access buttons above
the ACCESS CHANNEL/ASSIGN control panel in the
centre section.
3. Press the FLIP button to invert the layer for all fader strips
- channel and main.
This inverts the current layer selections allowing you to view all
‘hidden’ channels on the alternate layer with one button push.
4. Press the ALL 1ST button to reset
all
fader strips - channel
and main - to Layer 1.
5. Press STRP 2ND to switch the channel fader strips to
Layer 2.
6. Press the MAIN 2nd button to switch the eight main fader
strips to their second layer.
When you deselect any of these three buttons, the console
reverts to its previous layer status.
Press and hold the ALL 1ST, STRP 2
ND
or MAIN 2nd buttons for
more than 3 seconds to reset the layer status to all 1
st
or all 2nd.
Fader Strip
Tip