Tutorial
mc²66
V1.3/0
51/ 68
Creating Stereo Channels or Masters
Up until now, we have been dealing with mono input channels,
mono groups and a mono sum. However, any of theses
channels may easily be changed from mono to stereo either
from the Central Control Section or Signals display.
For example, to change SUM 1 from mono to stereo:
1.
Press the SEL button on the main fader strip controlling
SUM 1 to assign it to the Central Control Section.
The CHANNEL and LABEL displays update to show the system
name and label for SUM 1.
2.
Locate the IMAGE controls on the Central Control
Section:
3.
Press the STE button.
This links SUM 1 to its adjacent DSP channel (SUM 2) to create
the stereo channel.
To indicate that the channel is now stereo, you have stereo
metering, a STE LED on the fader strip, a stereo indicator on the
Main display and the Image section becomes active.
Note that if SUM 2 was assigned to the control surface, then
the SUM 2 mono channel disappears leaving a blank fader strip.
4.
Repeat steps 1 to 3 to change any of your groups or input
channels from mono to stereo.
Содержание mc266
Страница 1: ...mc 66 Tutorial Version V1 3 0 Edition 05 12 14...
Страница 3: ......
Страница 6: ...Table of Contents mc 66 V1 3 0 7 68...
Страница 9: ......