LAWO mc266, Руководство

Страница: 60 / 68

Tutorial
mc²66 V1.3/0 61/ 68
Applying Signal Processing
Depending on your choice of DSP configuration, full signal
processing may be available on your input channels, monitor
return channels, groups, sums and/or auxiliary masters. This
allows you to compress a group output or EQ an auxiliary master
in the same way you would apply signal processing to an input
channel. Please see Chapter 3 for more details on Signal Flow
and DSP configurations.
The following provides a step-by-step guide to some of the
signal processing sections within the Central Control Section.
1. Press the SEL button on a fader strip to assign it to the
Central Control Section:
The controls update to show the current settings for the
assigned channel.
When controlling processing, note that all rotary controls on the
mc
2
66 are touch sensitive encoders with the following features:
•
The dedicated alphanumeric display shows either the
parameter name or value which is being adjusted.
•
The ring of LEDs indicates the current position of the
control. Note that for levels, a corona appears around the
control indicating the amount of deviation from the
default value.
•
The LED square beneath each control changes from green
to yellow when a parameter is not set to its default value.
The controls default to provide fine parameter adjustment. For
coarse adjustment (5 times faster), push down on the control as
you adjust the parameter.
Tip