mc²36 MKII Installation & Service Guide
Version: 1.0/1
45/56
5. Service Procedures
5.9
Replacing the Local IO
The local IO exists as a self-contained unit which is mounted inside the control surface behind the Central GUI
and Overbridge.
Local IO Unit (profile)
To replace the local IO unit, you will need to disconnect all of its cabling from the rear panel, and remove the
Central Panel, Central GUI display and Overbridge blanking panel.
DO NOT
attempt to open the frame without first disconnecting the mains supply.
1.
Disconnect all of the local IO cabling from the console's rear panel. See
Console Rear Panel
2.
Remove the Central Panel, Central GUI display and Overbridge blanking panel as described earlier. See
.
In each case, the panel should be removed completely. You will see the local IO carrier unit mounted at the rear
of the frame:
