mc²36 MKII Installation & Service Guide
Version: 1.0/1
33/56
5. Service Procedures
5. Service Procedures
This chapter describes the service procedures available for the hardware.
5.1
Preparation
Please read and observe ALL of the
BEFORE servicing any component.
The system carries highly sensitive electronic components, and therefore should only be handled by
authorized personnel, and with the utmost care.
In particular, ALWAYS observe the following procedures:
·
The workspace must be ESD proof.
·
Before removing parts of the casing, shields, etc. the device MUST be switched off and
disconnected from the mains supply.
·
Check the unit for electrical safety after completing the work.
Using the Service Instructions
We recommend that you read all of the instructions in full before starting a procedure. Any product-specific
tools, such as Torx drivers, can be found in the Lawo tool case delivered with your system.
Further Information
Mechanical drawings and data sheets are available from the
Downloads
area at
(after
Login
).
If you need further assistance, the Lawo Support Department can be contacted by email at
or by telephone during normal working hours - please visit the
Support
area of the Lawo website for the most
up-to-date contact details.
