mc²36 MKII Installation & Service Guide
Version: 1.0/1
38/56
5. Service Procedures
5.5
Replacing a Fader
An individual fader unit can be replaced by removing the panel from the console.
In our example, it is the left-hand fader with the panel face-up which is being replaced:
Panel Face-up
Panel Face-down
DO NOT
attempt to open the frame without first disconnecting the mains supply.
1.
Remove the panel from the console frame as described
, and lay it it face-down on a piece of
foam, or similar ESD-proof protective material, away from the console.
2.
Remove the metal cover plate by unfastening the screws shown below. Take care not to damage the
trackpad cable.
Place the metal cover plate carefully to one side.
3.
Using a small flat-blade screwdriver, release the catches to disconnect the fader unit cables - there are
two cables to release:
