mc²36 MKII Installation & Service Guide
Version: 1.0/1
39/56
5. Service Procedures
4.
Turn the panel face-up and remove the fader cap.
5.
Remove the two screws holding the fader unit in place (using a T10 Torx driver):
6.
Turn the panel face-down and remove the fader unit. Note that the unit will be loose, and so it helps to
support it from behind as you turn the panel.
You are now ready to fit the replacement.
7.
Insert the new fader unit into position.
8.
Carefully lift the panel onto its side, supporting the fader from behind, and replace the two front panel
screws:
9.
Turn the panel face-down once more and reconnect the two fader unit cables (see step 3).
10.
Fit the panel back into the console frame, apply mains power and then
communication). Then test the new fader's functionality.
