Landoll Drexel SLT30 AC, Руководство по обслуживанию

Страница: 73 / 82

TRUCK LUBRICATION AND CHAIN MAINTENANCE
6-3
Figure 6-3: Steering Gears
Tilt Cylinder Clevis
1. Turn the truck off and remove the key and place in a
secure area.
2. Perform a Lock Out/Tag Out procedure.
3. Grease the clevis pin fitting on each side of the mast
until fresh grease is squeezed from the clevis. Wipe
off excess grease. See Figure 6-7.
Shift Chain Rollers/Pivot Cylinder
Clevis Pin
1. Start the truck and pivot the mast 90 degrees to the
right.
2. Turn the truck off and remove the key and place in a
secure area.
3. Perform a Lock Out/Tag Out procedure.
4. Grease the pivot cylinder clevis until fresh grease is
squeezed from the clevis. Wipe off excess grease.
See Figure 6-4.
5. Grease the shift chain rollers. There is one roller on
each shift cylinder. You can reach the right side roller
from the front with mast pivoted 90 degree. See
Figure 6-5. The left side roller grease fitting is found
by lifting the floor mat. The fitting can be seen in
Figure 6-6. Grease the roller until fresh grease is
squeezed out between the roller and roller bracket.
6. Lubricate shift chains
Figure 6-4: Pivot Pin Clevis Lubricating
Figure 6-5: RIght Side Shift Roller
Figure 6-6: Left Side Shift Roller
G Grease Points Grease Points
G Grease Point Grease Point
R Right Side Right Side
L Left Side Left Side
https://www.forkliftpdfmanuals.com/