Landoll Drexel SLT30 AC, Руководство по обслуживанию

Страница: 18 / 82

1-12 F-459-R1
INTRO, SAFETY, INSPECTION AND DASH OPERATIONS
Lubrication Specifications
Torque Specifications
Fluid Capacities
Name Lubrication Notes
Mast Chain/Shift Chain SAE 40W. oil or Bowman Heavy Load Red Grease Clean and re-oil
Mast Rail Chassis Lube or Kendall Sr-12X Lube inner side of upright rail
Rotation Bearings Texaco Ref. C&C #880 Use standard lubrication gun
Steering Knob Light weight oil Lightly oil
Reservoir Cap SAE 30W oil Clean in solvent and re-oil
Hydraulic Reservoir Conoco Power flow HE (ISO Grade 46) Filtered to
ISO 4406 cleanliness code 15/13/11 or equivalent
Grade oil filtered to 15/13/11. Drain, flush, and refill
Gear Case 8SW/40 gearlube Drain, flush, and refill
Master Cylinder Heavy duty brake fluid DOT 3 Check level. Add if necessary
Steering Gears Exposed Gear Lube, Mobil 375 NC, C & C #880 Aerosol Spray/Brush
application
Cylilnder Cleavis Texaco Ref. C & C #880 Use standard lubrication gun
Shift Chain Rollers Texaco Ref. C & C #880 Brush or spray on lubricant
Splines of the Drive Motor and Gearbox Kluberplex BEM 34-132 Apply to splines
Carriage Slide Pads Gredag 741 or AeroShell 33MS Brush on slide pads
*Failure to refill with oil that meets ISO 4406 cleanliness code 15/31/11 may void the warranty. Typical “NEW” oil DOES NOT
meet this specification. Contact Landoll Corporation or your lubricant supplier for recommendation.
Component Torque
Drive Wheel 125 ft. lbs. (305 Nm.)
Fluid draining and filling plug 16 ft. lbs. (22 Nm.)
Hydraulic braking unit 37 ft. lbs. (50 Nm.)
Electrical Connection M6 35 in. lbs. (4 Nm.)
Electrical Connection M8 85 in. lbs. (10 Nm.)
Electrical Connection M10 170 in. lbs. (19 Nm.)
Drive Plate 150 ft. lbs.
Drive Motor Mount 60 ft. lbs.
Mast and Side Shift Mechanism
Chain guard capscrews 48-52 ft. lbs. (65-71 Nm.)
Main lift cyl. plunger retainer 95-125 ft. lbs. (129-169 Nm.)
Free lift cyl. plunger retainer 275-300 ft. lbs. (373-407 Nm.)
Carriage roller capscrews 70-80 ft. lbs. (95-108 Nm.)
Chain and hose sheave screws 26-30 ft. lb. (35-41 Nm.)
Lift chain adjusting nuts 50-70 ft. lbs. (68-90 Nm.)
Backrest screws 145 ft. lbs. (197 Nm.)
Side shift mounting hooks 115-125 ft. lbs. (156-170 Nm.)
Overhead Guard Bolts 170 Ft-lbs (230 Nm.)
Item Capacity - Quarts (Liters)
Hydraulic Tank 11.6 gallons (44 liters)
Brake Fluid 0.21 quarts (0.20 liters)
Gear Box 1.85 gallons (7 liters)
https://www.forkliftpdfmanuals.com/