Landoll Drexel SLT30 AC, Руководство по обслуживанию

Страница: 62 / 82

5-10 F-459-R1
DREXEL SLT30/35 AC CALIBRATION PROGRAMMING
During truck calibration and /or truck operation, warnings
may appear on the Dash Display.
The warnings shown below will “NOT” disable truck
operation. These warnings (Fault Codes) will “NOT” be
logged into the truck error log.
Attention needs to be given to these warnings to
prevent damage to the truck.
C
O
D
E
Display
Message
Possible
Explanation
Possible
Solutions
30 Lo Voltage Traction Warning Traction controller voltage is
below the low warning
setpoint.
Bring traction controller voltage above
the low warning setpoint. If the voltage
continues to drop, an error will occur.
31 Hi Voltage Traction Warning
Traction controller voltage is
above the high warning
setpoint.
Bring traction controller voltage below
the high warning setpoint. If the voltage
continues to rise, an error will occur.
33 Lo Traction Motor Temp Warning Traction motor temperature is
below the low warning
setpoint.
Bring the traction motor temperature
above the low warning setpoint. If the
temperature continues to drop, an error
will occur.
34 Hi Traction Motor Temp Warning Traction motor temperature is
above the high warning
setpoint.
Bring the traction motor temperature
below the high warning setpoint. If the
temperature continues to rise, an error
will occur.
35 Traction Motor Temp Warning Traction motor temperature
sensor is not connected to
truck harness.
---------------------------------------
Faulty traction motor
temperature sensor.
Check to see if traction motor
temperature sensor is connected to the
truck harness.
----------------------------------------------------
Replace traction motor temperature
sensor.
37 Hi Traction Drive Temp Warning Traction controller
temperature is above the high
warning setpoint.
Bring the traction controller temperature
below the high warning setpoint. If the
temperature continues to rise, an error
will occur.
39 Lo Traction Drive Temp Warning Traction controller
temperature is below the low
warning setpoint.
Bring the traction controller temperature
above the low warning setpoint. If the
temperature continues to drop, an error
will occur.
40 Traction Drive Temp Warning Faulty traction controller
temperature sensor. Replace traction controller.
42 Traction Motor Warning Traction motor is not
connected to the truck.
---------------------------------------
Faulty traction motor.
Check to see if the traction motor is
connected to the truck harness.
----------------------------------------------------
Replace traction motor.
https://www.forkliftpdfmanuals.com/