Landoll Drexel SLT30 AC, Руководство по обслуживанию

Страница: 63 / 82

DREXEL SLT30/35 AC CALIBRATION PROGRAMMING
5-11
See table below. If the warnings shown below appear,
Truck operation “WILL” be disabled. These
warnings(Fault Codes) will “NOT” be logged into the truck
error log.
IMPORTANT
Immediate attention needs to be given to these
warnings.
C
O
D
E
Display
Message
Possible
Explanation
Possible
Solutions
1 Return Throttle to Neutral Throttle was depressed when
the truck was started up or
when an error occurred.
Release Throttle.
2 Return Direction Switch to
Neutral
Direction Switch was in FWD
or REV when the truck was
started up or when an error
occurred.
Return the direction switch to neutral.
3 Battery Gate Switch Open Battery gate is not properly
installed.
---------------------------------------
The battery gate switch is not
connected to the truck
harness.
Insure battery gate is installed properly.
----------------------------------------------------
Check the battery gate switch plug to
see if it is connected to the truck
harness.
4 Seat Switch Open Operator is not properly
seated on the seat when
operating the truck.
---------------------------------------
Seat switch is not connected
to the truck harness.
---------------------------------------
Faulty seat switch. Insure operator is properly seated
before operating the truck.
----------------------------------------------------
Check seat switch plug to see if it is
connected to the truck harness.
----------------------------------------------------
Replace seat switch.
5 Steer System Not Active An error or fault has occurred
that has caused the VMC30
to disable the steer system
until the error is corrected. Fix the condition that caused the error
or fault and cycle the key switch.
62 Lift Lockout Battery voltage has fallen
below the lift lockout
threshold. Recharge battery.
https://www.forkliftpdfmanuals.com/