manualshive.com logo in svg

Lake Shore 648, Руководство пользователя

Поделиться
Скачать
Lake Shore 648 Скачать руководство пользователя страница 67

  

5.3.3   Installing the USB Driver       

57

 

|   

   

www.lakeshore.com

D

Right-click on 

My Computer

 and then click 

Properties

. This will open 

the System Properties dialog.

D

Click the 

Hardware

 tab and then click 

Device Manager

.

 b.      Click 

View

 and ensure the 

Devices by Type

 check box is selected.

 c.      In the main window of Device Manager, locate the 

Ports 

(COM & LPT)  

device type. In many instances this will be between the Network adapt-
ers and Processors items. If the 

Ports

 (COM & LPT) item is not already 

expanded, click the + icon. Lake Shore Model 648 should appear 
indented underneath 

Ports

 (COM & LPT). If it is not displayed as 

Lake Shore Model 648, it might be displayed as USB Device. If neither are 
displayed, click 

Action

 and then select 

Scan for hardware changes

, 

which may open the Found New Hardware wizard automatically. If the 
Found New Hardware wizard opens, continue to step 4.

 d.      Right-click on Lake Shore Model 648 and click 

Update Driver

.

 4. Select 

No, not at this time

 and click 

Next

.

 5. Select 

Search for the best driver in these locations

, click to clear the 

Search 

removable media (floppy, CD-ROM…)

 check box, and click the 

Include this loca-

tion in the search

 check box.

 6. Click 

Browse

 and open the location of the extracted driver.

 7. Click 

Next

.

 8. When the driver finishes installing a confirmation message stating “The wizard 

has finished installing the software for Lake Shore Model 648 electromagnet 
power supply” should appear. Click 

Finish

 to complete the installation.

5.3.3.4 Installing the USB Driver from the Included CD

The Model 648 USB driver is available on the included CD. The following section 
describes the process of installing the driver from the CD. To install the driver you 
must be logged into a user account that has administrator privileges.

For Windows Vista® and Windows 7®
 1. Insert the CD into the computer.
 2. Follow steps 1–9 of the Windows Vista® procedure in section 5.3.3.3.3.
 3. Click 

Browse

 and select the drive containing the included CD.

 4. Ensure the 

Include subfolders

 check box is selected and click 

Next

.

 5. When the driver finishes installing a confirmation message stating “Windows has 

successfully updated your driver software” should appear. Click 

Close

 to com-

plete the installation.

For Windows® XP
 1. Insert the CD into the computer.
 2. Connect the USB cable from the Model 648 to the computer.
 3. Turn on the Model 648.
 4. When the Found New Hardware wizard appears select 

No, not at this time 

and 

click 

Next

.

 5. Select 

Install the software automatically (recommended)

 and click 

Next

.

 6. The Found New Hardware wizard should automatically search the CD and install 

the drivers. 

When the Found New Hardware Wizard finishes installing the drivers a message stat-
ing “the wizard has finished installing the software for Lake Shore Model 648 electro-
magnet power supply” should appear. Click 

Finish

 to complete the installation

Содержание 648



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды