Kyocera Ci1000, Руководство по эксплуатации

Страница: 67 / 214

3
3-21 Using AppleTalk with Macintosh computers on an IPX (Novell) network
Setting up NetWare Windows clients
Before setting up client workstations, make sure you perform Network Setup on
the printer, and that the settings reflect the entities you created in
PCONSOLE .
Client setup has two parts:
• Install the PS printer driver on each Windows workstation.
• Configure the printer driver to print to a print queue on a Novell file server.
For instructions on installing the appropriate printer driver for your system see
Chapter 5.
For instructions on configuring the printer driver to print to a Novell file server
print queue, see the sections entitled: Completing the Windows 95, NT 4.0 or
3.1 IPX (Novell) connection in Chapter 5.
Using AppleTalk with Macintosh computers
on an IPX (Novell) network
Macintosh users on an IPX network can print to the printer in two ways:
• Directly, using AppleTalk and bypassing the NetWare server
• Through a NetWare server running NetWare for Macintosh
Since the printer supports both AppleTalk and IPX protocols at the same time, it’s
not necessary to use the second option. However, a network administrator may
choose to route all print jobs through a server.
N
OTE
:
The printer can be attached to only one NetWare server at a time.
Printing directly to the printer
Due to the layered design of networks, data can be transmitted using more than
one network protocol. When Macintosh computers are connected to an IPX
network, they can continue to transmit data over Ethernet cable using AppleTalk
protocols. If the printer is on the same network, Macintosh computers can see and
print to the printer, provided that AppleTalk is enabled on the Macintosh and in
Network Protocol Setup.