Kyocera Ci1000, Руководство по эксплуатации

Страница: 92 / 214

5
5-14 Installing Software for Windows
Setting up parallel printing on Windows NT 4.0
Once you have installed the PostScript Printer Driver for Windows NT 4.0
complete the setup for parallel port printing as follows:
T
O SET UP PARALLEL PRINTING
:
1. Click the Start button, choose Settings, and then choose Printers.
2. Double-click the Ci1000 icon, and choose Properties from the Printer menu.
In the Ports tab, confirm that LPT1 (Local Port) is checked. The Ci1000 is ready
to accept parallel print jobs from your computer.
3. Select the General tab, and click Print Test Page.
When you select Print, your files are sent over the parallel port connection to the
Ci1000.
4. Select the Sharing tab if you want to share the printer with network users. Select
Shared, and select a share name.
Select the operating system or systems used by your network clients if you want to
install a printer driver that those clients can automatically download when they
connect. Click OK.
5. In the dialog box that appears, navigate to the location of the alternate printer
driver to install.
6. Click OK to exit the Printer Properties dialog box.
Setting up IPX (Novell) printing with Windows NT 4.0
The following procedure describes how to prepare the computer for printing
using IPX protocols.
B
EFORE YOU BEGIN
:
•
Verify the Ci1000 printer has been configured for Novell printing in Network
Protocol Setup.
For more information about setting up the printer for IPX (Novell) printing, see
“Setting up IPX (Novell) printing” on page 3-13.