Kyocera Ci1000, Руководство по эксплуатации

Страница: 106 / 214

6
6-6 Setup from the Control Panel and WebSetup
Token Ring Setup
TOKEN RING
ON/OFF [ON]
Select
ON
to enable Token Ring network communication.Token Ring options
appear only if an optional Token Ring card is installed.
TR SPEED
AUTO/4 M BPS/16 M BPS [AUTO]
Select
AUTO
to automatically detect the speed at which data can be transferred over
the Token Ring network, or optionally specify the speed of your Token Ring
network.
MAX. FRAME SIZE
0.5K/1K/2K/4K [4K]
Use the arrow buttons to select a maximum frame size for Token Ring
communication.
N
OTE
:
The Token Ring frame size must be no greater than the frame size used by
any router or Novell file server on the network.
SOURCE ROUTING
ON/OFF [OFF]
Select
ON
to allow the packet to travel to its destination through routers on the
network. The packet’s source dictates the route that the packet will take.
REQ ALL ROUTE
ON/OFF [ON]
If source routing is enabled, select
ON
to allow all routers on the network to
broadcast the presence of the printer, enabling packets from clients on the
network to travel to the printer by any route.
RESP ALL ROUTE
ON/OFF [ON]
If source routing is enabled and
REQ ALL ROUTE
is set to
ON
select
YES
to allow all
routers on the network to broadcast the presence of clients to the printer, enabling
packets from clients on the network to travel to the printer by any route.