Kyocera Ci1000, Руководство по эксплуатации

Страница: 103 / 214

6
6-3 Printer Setup
POWER SAVER (M)
10 SEC/30 MIN/1 HOUR/2 HOURS [30 MIN]
Use this option to select the length of time during which there is no printer
activity before the Ci1000 switches to Power Saver mode. Full power mode is
automatically restored when the printer receives a network print job or any button
on the control panel is pressed.
CHANGE PASSWORD
YES/NO [NO]
Use this option to set or change the administrator password for the printer. In
most cases, only the system administrator should have access to this password.
When you select
YES in the CHANGE PASSWORD screen
, you are prompted to enter
the new password.
NEW PASSWORD
To enter a new password use the up arrow button to scroll through characters and
the right arrow button to move from left to right, from character to character. To
delete a character, use the left arrow button. The password can be any
combination of letters and numbers up to 16 characters. When you are finished,
press the
Enter button. You are then prompted to enter the new password again to
verify that you entered it correctly.
VERIFY PASSWORD
To verify a new or existing password, you must enter the password again. If you
make a mistake, you will be prompted to enter the password again.
Printer Setup
The Printer Setup menus are used to set the printer’s page description language
(PDL), paper size, and in some models, to specify the ability to print using low
toner. (Default values, where applicable, appear in square brackets.)
PRINTER SETUP
To advance to the
PAGE DESC LANG
screen, press Enter.