Kyocera Ci1000, Руководство по эксплуатации

Страница: 44 / 214

2
2-18 Printer Setup
Printing pages from the control panel
There are several pages in the printer’s ROM that you can print from the Ci1000.
This section contains instructions for printing a Configuration page, Test page,
and Job Log.
You can print a test page before you set up the Ci1000. You can also print a test
page at other times, from the
READY
or the
POWER SAVE ON
screen.
T
O PRINT A TEST PAGE
:
1. Turn on the printer and allow it to warm up.
Messages appear on the control panel as the Ci1000 printer runs through its
power-up tests.
2. From the READY screen, press the Menu button on the control panel once.
The
PRINT PAGES FROM LIST
screen is displayed.
3. Press the Enter button again. PRINT appears on the upper line, and the name of
the first sample page on the lower line.
Options include
CONFIGURATION, JOB LOG, PS FONT LIST,
and
TEST PAGE
.
Page: Description:
Configuration
page A page that gives the current device configuration and lists the
selected options for all Setup menus
Job Log A list of the most recently printed jobs
For information about using the WebSpooler to view and
manipulate jobs in the Job Log, see “Using the Job Log” on
page 7-10.
PostScript Font
List A list of PostScript fonts resident on the printer
Test page A Test page that enables you to confirm that the printer is properly
connected
This page includes samples of color so you can troubleshoot
printing problems as well as such information as: printer name,
enabled network protocols and amount of memory.