1-3-13
2BT
Auto preheat time
Sets the auto preheat time.
1. Select “F14” and press the enter key.
2. Select the setting and press the enter key.
Setting is available between 5 and 45 min. in 5
min. steps.
Setting range: 1 (5 min.)/2 (10 min.)/3 (15 min.)/
4 (20 min.)/5 (25 min.)/6 (30 min.)/7 (35 min.)/
8 (40 min.)/9 (45 min.)
Sets the auto preheat time to be shorter than the
auto shutoff time.
Auto shutoff time
Sets the auto shut-off time.
1. Select “F15” and press the enter key.
2. Select the setting and press the enter key.
Setting is available between 15 and 120 min. in 15
min. steps.
Setting range: 1 (15 min.)/2 (30 min.)/3 (45 min.)/
4 (60 min.)/5 (75 min.)/6 (90 min.)/7 (105 min.)/
8 (120 min.)
Preheat recovery time
Selects the mode of the auto preheat function from
recovery priority mode and power save priority mode.
1. Select “F16” and press the enter key.
2. Select the priority mode and enter key: on
Priority mode: 1 (recovery priority mode)/
2 (power save priority mode)
Viewing total counter value
Displays the total number of copies.
1. Select “F17” and press the enter key.
The total number of copies are displayed on the
copy quantity/magnification display.
Toner counter report
Outputs the report on the toner consumption ratio.
1. Select “F18” and press the enter key.
The list is printed out.
Toner replacement message output setting
Sets if a message requesting the user to replace the
toner container is printed when the toner is used up.
1. Select “F19” and press the enter key.
2. Select “on” or “off” and press the enter key.
Setting range: 1 (on)/2 (off)
Paper feed shifting adjustment (drawer)
Adjusts displacement of the copy image.
1. Select “F20” and press the enter key.
2. Select the setting and press the enter key.
Setting range: -3.0 to +3.0 (1 steps moves 0.1)
Paper feed shifting adjustment (bypass tray)
Adjusts displacement of the copy image.
1. Select “F21” and press the enter key.
2. Select the setting and press the enter key.
Setting range: -3.0 to +3.0 (1 steps moves 0.1)
Use A4R/8
1
/
2
"
×
11"R size paper.
Inch/metric specifications setting
Switches the copier specifications setting between
inch and metric.
1. Select “F22” and press the enter key.
2. Select the specifications setting and press the
enter key.
Specifications setting: 1 (inch)/2 (metric)/
3 (metric for Japan)
Folio length setting (drawer)
Sets the length when folio is selected as the paper
size.
1. Select “F23” and press the enter key.
2. Select the length and press the enter key.
Length: 1 (210 mm)/2 (216 mm)
This setting item is available only when metric is
selected for the copier specifications.
Folio length setting (bypass tray)
Sets the length when folio is selected as the paper
size.
1. Select “F24” and press the enter key.
2. Enter the setting and press the enter key.
Setting is available between 200 and 216 mm.
This setting item is available only when metric is
selected for the copier specifications.
