1-3-8
2BT
13. Pull the drawer out as far as it will go.
14. Press the drawer bottom plate down and lock it
there.
15. Holding the width adjustment lever, move it to
align the width guide with the required paper
width.
16. While squeezing the presses on the sides,
remove the length guide and then insert it into the
holes of the required paper length.
Store the length guide in the space shown in the
diagram when the paper touches the right-hand
wall of the drawer.
Figure 1-3-14
Figure 1-3-15
Figure 1-3-16
Load paper.
Drawer bottom plate
Width adjustment
lever
Width guide
Length guide
