![Kyocera Mita KM-1505 Скачать руководство пользователя страница 108](http://html1.mh-extra.com/html/kyocera-mita/km-1505/km-1505_service-manual_2017036108.webp)
2BT
1-6-16
4. Insert the locating ball on each of the scanner
wires into the hole in the respective scanner
wire drum and wind the scanner wire two
turns inward and eight turns outward.
• Use the gray wire at the machine front and
the black wire at the machine rear.
5. Refit the scanner wire drum shaft to the
scanner unit.
• Make sure that the locating balls point
downward.
Figure 1-6-26
6. Insert the two frame securing tools into the
positioning holes at the front and rear of the
scanner unit to pin the mirror 2 frame in
position.
Figure 1-6-27
2 turns inward
8 turns outward
Machine front (gray)
Machine rear (black)
Locating
ball
Locating
ball
Scanner wire drum
2 turns inward
8 turns outward
Frame securing tool
Mirror 2 frame
Frame securing tool