2BT
1-2-2
1-2-3 Installation environment
1. Temperature: 10 - 32.5
°
C/50 - 90.5
°
F
2. Humidity: 20 - 85%RH
3. Power supply: 120 V AC, 9 A
220 - 240 V AC, 4.8 A (average 2.5 A)
4. Power source frequency: 50 Hz
±
0.3%/60 Hz
±
0.3%
5. Installation location
• Avoid direct sunlight or bright lighting. Ensure that the photoconductor will not be exposed to direct sunlight or other
strong light when removing paper jams.
• Avoid extremes of temperature and humidity, abrupt ambient temperature changes, and hot or cold air directed onto
the machine.
• Avoid dust and vibration.
• Choose a surface capable of supporting the weight of the machine.
• Place the machine on a level surface (maximum allowance inclination: 1
°
).
• Avoid air-borne substances that may adversely affect the machine or degrade the photoconductor, such as
mercury, acidic of alkaline vapors, inorganic gasses, NOx, SOx gases and chlorine-based organic solvents.
• Select a room with good ventilation.
6. Allow sufficient access for proper operation and maintenance of the machine.
Machine front: 1000 mm/39
3
/
8
" Machine rear: 300 mm/11
13
/
16
"
Machine right: 300 mm/11
13
/
16
" Machine left: 500 mm/19
11
/
16
"
Figure 1-2-1 Installation dimensions
a: 376 mm/14
13
/
16
"
b: 497 mm/19
9
/
16
"
c: 691 mm/27
3
/
16
"
d: 497 mm/19
9
/
16
"
e: 847 mm/33
5
/
16
"
f: 845 mm/33
1
/
4
"
a
b
c
d
f
e
