KYMCO XCITING 500, Руководство по обслуживанию

Страница: 259 / 349

15
. REAR FORK/REAR WHEEL/
REAR SHOCK ABSORBER
15-2
XCITING 500
SERVICE INFORMATION
GENERAL INSTRUCTIONS
•
A contaminated brake disc or pad reduces stopping power. Discard contaminated parts and clean
a contaminated disc with a high quality brake degreasing agent.
•
Riding on damaged rims impairs safe operation of the vehicle.
•
This section covers of the rear wheel and rear suspension.
•
A jack or other support is required to support the vehicle.
•
Do not twist or bend the brake hose when servicing.
•
Use genuine KYMCO replacement bolts and nuts for all suspension pivots and mounting points.
•
Refer to section 16 for brake system information.
SPECIFICATIONS
Unit: mm (in)
ITEM STANDARD SERVICE LIMIT
Minimum tire tread depth
⎯
2.0 (0.08)
Rider only
⎯
Cold tire pressure
Rider and passenger
250 kPa (2.50 kgf/cm
2
, 36 psi)
⎯
Radial
⎯
2.0 (0.08) Wheel rim runout
Axial
⎯
2.0 (0.08)
TORQUE VALUES
Rear brake disc bolt 42 N•m (4.3 kgf•m, 31 lbf•ft)
ALOC bolt: replace with a new one.
Rear axle nut 180 N•m (18 kgf•m, 130 lbf•ft)
Rear shock absorber upper mounting bolt 40 N•m (4 kgf•m, 29 lbf•ft)
Rear shock absorber lower mounting bolt 40 N•m (4 kgf•m, 29 lbf•ft)
Final shaft holder bolt 32 N•m (3.2 kgf•m, 23 lbf•ft)
Right/parking brake caliper mounting bolt 32 N•m (3.2 kgf•m, 23 lbf•ft)
ALOC bolt: replace with a new one.