KYMCO XCITING 500, Руководство по обслуживанию, Страница: 273 / 349

16
. BRAKE SYSTEM
16-3
XCITING 500
TORQUE VALUES
Master cylinder reservoir cover screw 2 N•m (0.2 kgf•m, 1.4 lbf•ft)
Master cylinder holder bolt 12 N•m (1.2 kgf•m, 9 lbf•ft)
Brake lever pivot bolt 6 N•m (0.6 kgf•m, 4.3 lbf•ft)
Brake lever pivot nut 6 N•m (0.6 kgf•m, 4.3 lbf•ft)
Brake light switch screw 1 N•m (0.1 kgf•m, 0.7 lbf•ft)
Brake caliper mounting bolt 32 N•m (3.2 kgf•m, 23 lbf•ft)
ALOC bolt: replace with a new one.
Brake caliper bleed screw 6 N•m (0.6 kgf•m, 4.3 lbf•ft)
Brake pad pin 18 N•m (1.8 kgf•m, 13 lbf•ft)
Front/Rear caliper pad pin plug 2 N•m (0.2 kgf•m, 1.4 lbf•ft)
Brake hose oil bolt 35 N•m (3.5 kgf•m, 25 lbf•ft)
Delay valve bleed screw 6 N•m (0.6 kgf•m, 4.3 lbf•ft)
TROUBLESHOOTING
Brake lever soft or spongy Brake lever hard
•
Air in the hydraulic system
•
Clogged/restricted brake system
•
Low brake fluid level
•
Sticking/worn caliper piston
•
Clogged fluid passage
•
Caliper not sliding properly
•
Contaminated brake disc/pad
•
Clogged/restricted fluid passage
•
Warped/deformed brake disc
•
Worn caliper piston seal
•
Worn brake disc/pad
•
Sticking/worn master cylinder piston
•
Sticking/worn master cylinder piston
•
Bent brake lever
•
Contaminated master cylinder
•
Contaminated caliper
Brake drag
•
Caliper not sliding properly
•
Contaminated brake disc/pad
•
Leaking hydraulic system
•
Worn brake disc/pad
•
Worn caliper piston seal
•
Warped/deformed brake disc
•
Worn master cylinder piston cups
•
Caliper not sliding properly
•
Bent brake lever