KYMCO XCITING 500, Руководство по обслуживанию, Страница: 323 / 349

19
. ELECTRIC STARTER
19-2
XCITING 500
SERVICE INFORMATION
GENERAL
•
Always turn the ignition switch to “OFF” before servicing the starter motor. The motor could
suddenly start, causing serious injury.
•
The starter motor can be serviced with the engine in the frame.
•
When checking the starter system, always follow the steps in the troubleshooting flow chart
(page 19-2).
•
A weak battery may be unable to turn the starter motor quickly enough, or supply adequate
ignition current.
•
If the current is kept flowing through the starter motor to turn it while the engine is not cranking
over, the starter motor may be damaged.
•
See section 12 for starter clutch servicing.
•
See section 20 for following components:
ä
Ignition switch
ä
Starter switch
ä
Brake light switch
TROUBLESHOOTING
•
Check for the following before troubleshooting:
─ Blown main fuse (30A) and sub fuse (10 A)
─ Loose battery and starter motor cable
─ Discharged battery
•
The starter motor can turn with the following conditions:
─ Ignition switch ON
─ Engine stop switch in RUN
─ Rear brake lever fully squeezed
─ Side stand retracted
─ Starter switch pushed
Starter motor will not turn
•
Poorly connected battery terminals.
•
Open or short circuit in battery.
(Go to following page)
Check for loose or poorly
connected battery terminals
and opened or shorted battery
cable.
Abnormal
Normal