KYMCO XCITING 500, Руководство по обслуживанию

Страница: 93 / 349

5. FUEL SYSTEM /FUEL PUMP
/FUEL TANK/CARBURETOR
5-3
XCITING 500
SERVICE INFORMATION
GENERAL INSTRUCTIONS
•
When working with gasoline, keep away from sparks and flames.
•
Note the locations of O-rings when disassembling and replace them with new ones during
assembly.
•
Before float chamber disassembly, drain the residual gasoline from the float chamber.
•
Do not try to disassemble the automatic choke.
•
When assembling the vacuum chamber and air cut-off valve, be careful not to damage the
diaphragms.
•
All cables, fuel lines and wires must be routed and secured at correct locations.
•
When removing the fuel tank, keep sparks and flames away from the working area.
•
When removing the fuel tank, the remaining fuel in the tank must be lower than 1/2 of the fuel
tank capacity to avoid gasoline overflowing.
•
Fuel tank capacity: 12.8 liters
SPECIFICATIONS
XCITING 500
Type CVK
Carburetor identification number 15F8 SD8
Size of bore (mm)
Ø
36
Main jet #108
Slow jet #38
Idle speed 1400±100
Pilot screw opening 3½ ± ½ turns out
Fuel pump flow (at 12V) 370 ml (12.6 US oz, 13 lmp oz)/min