KYMCO XCITING 500, Руководство по обслуживанию

Страница: 210 / 349

12
. A.C. GENERATOR/STARTER CLUTCH
12-2
XCITING 500
SERVICE INFORMATION
GENERAL INSTRUCTIONS
•
All servicing operations and inspections in this section can be made with the engine installed.
•
Drain the coolant before removing the right crankcase cover.
•
Be careful not to drain the coolant when the engine temperature is high. (Perform this operation
when the engine is cold.)
•
Drain the coolant into a clean container.
•
Drain the engine oil into a clean container before removing the right crankcase cover.
•
When the right crankcase cover is installed, fill with the recommended engine oil and coolant.
Then, bleed air from the water jacket.
•
Refer to section 17 for alternator inspection, and to section 18 for ignition pulse generator
inspection.
SPECIFICATIONS Unit: mm (in)
Item Standard Service Limit
Starter driven gear I.D. 27.026 (1.081)
～
27.045 (1.0818) 27.1 (1.084)
Starter driven gear O.D. 45.66 (1.8264)
～
45.673 (1.8292) 45.6 (1.824)
SPECIAL TOOLS
Flywheel puller E054
Flywheel holder E021
TORQUE VALUES
Flywheel nut: 55 N•m (5.5 kgf•m, 40 lbf•ft)
TROUBLESHOOTING
Starter motor turns, but engine does not turn
•
Faulty starter clutch
•
Damaged starter reduction gear