KYMCO XCITING 500, Руководство по обслуживанию

Страница: 139 / 349

7. ENGINE REMOVAL/INSTALLATION
7-10
XCITING 500
Pull out the long engine collar.
INSTALLATION
Installation is in the reverse order of removal.
Torque:
Engine mounting bolt:
80 N•m (8 kgf•m, 58 lbf•ft)
Engine mounting nut:
80 N•m (8 kgf•m, 58 lbf•ft)
Route the brake hoses and wires properly
(page 1-12).
INSPECTION
Inspect the bearing:
Bearings allow play in the right/eft crankcase
or the bearing turns roughly → Replace.
Inspect the engine mount bolt:
Band/Damage
→ Replace
Long Engine Collar
Bearing
● At installing the engine, be careful not
to catch your hand or finger between
the engine hanger and crankcase.
● Check for leakage of the engine oil and
engine coolant.
＊
Do not attempt to straighten a bent
engine mount bolt.
＊