KYMCO ADG5, Руководство пользователя

Страница: 338 / 426

10..Brake System
XCITING S 400
10.Brakes
This chapter covers the location and servicing of the brake system components
for the KYMCO XCITING S 400 model.
GENERAL INSTRUCTIONS .......................................................... 10-1
TROUBLESHOOTING ................................................................... 10-2
DIAGRAM ...................................................................................... 10-3
DISC BRAKE ................................................................................. 10-4
FRONT CALIPER ............................................................................ 10-8
REAR BRAKE PAD ......................................................................... 10-13
MASTER CYLINDERS ..................................................................... 10-15
PARKING BRAKE ........................................................................... 10-18
ABS SYSTEM ................................................................................ 10-19
ABS TROUBLESHOOTING OUTLINE .......................................... 10-24
GENERAL INSTRUCTIONS

A contaminated brake disc or pad reduces stopping power.
Discard contaminated parts and clean a contaminated disc with
high quality brake degreasing agent.

Avoid spilling brake fluid on painted, plastic or rubber parts. Place
a rag over these parts whenever the system is serviced.

Never allow contamination (dirt, water, etc.) to get into and open
brake reservoir.

Once the hydraulic system has been opened, or if the brake feel
spongy, the system must be bled.

Always use fresh DOT 4 brake fluid from a sealed container when
servicing the system. Do not mix different types of fluid as they
may not be compatible.

Always check brake operation before riding the vehicle.
Warning:
Frequent inhalation of brake pad dust, regardless of material composition
could be hazardous to your health. Avoid breathing dust particles.
10-1