KYMCO ADG5, Руководство пользователя

Страница: 417 / 426

14.Wheels
XCITING S 400
Wheel Inspection
SAFETY FIRST: Protective gloves and eyewear are recommended at this point.
Turn the inner race of each bearing with your finger to see if they turn smoothly
and quietly. Also check if the outer race fits tightly in the hub. Replace the bearings
if the races do not turn smoothly, quietly, or if they fit loosely in the hub. See the
Wheel Bearing Replacement topic for more information.
Place the wheel on a truing stand and use a dial indicator to check if
the rim is out of true. The specifications for the front and rear wheels
are the same. Check for lateral wobble. The service limit is 2.0 mm
(0.08 in) or less.
Check for radial hop. The service limit is 2.0 mm (0.08 in) or less.
Check the front axle runout. The axle runout specification is half of the
total indicator reading. Replace the axle if the measurement exceeds
0.2 mm or 0.008 in.
Inspect the dust seals and replace them as needed.
14-11