Kurzweil PC3LE6, Руководство музыканта, Страница: 279 / 296

Power User Tips
General Tips
14-3
category Enter button. If you use this method, make sure to unlight the category shift button by
pressing it again after making your selection.)
4. Lastly, hold the Category button that you wish to save a favorite for (the Category button that is
currently lit.) The next time you choose that category, your favorite program will be selected.
Easy Audition (Play A Demo Song For Each Program)
Any time you want to hear what a program sounds like, highlight the program’s name (while in
Program mode) then press the Play/Pause button to play a brief sample. The Demo Button
parameter on the Master Mode 2 page must be on for Easy Audition to work; the parameter is
on by default. See
Demo Button on page 9-10 for details.
Program Mode General Tips
Save The Current Knob And Switch Settings From The Program Mode Main Page
On the Program mode main page, if you change the settings of any controls (knob position,
assignable switch on/off, Mod Wheel position, as well as Arp Settings,) the LED on the
Save
button will light. When the LED on the Save button is lit, press the Save button to bring up the
save dialog and save your edits to the current program. (If you switch to a different program,
the alterations that you made to the previous program will be lost without warning.)
Saving A Newly Edited Program
If you are saving changes to a program that you have not previously edited, the save dialog will
choose the first available (lowest) user ID# as a save location (so that you don’t replace the
original program.) You can also choose a different ID# to save the program to and rename the
program if desired. If you have edited a factory ROM program and wish to save over the
original program at the original ID#, simultaneously press the - / + buttons (below the Alpha
Wheel) to jump between selecting the program’s original ID# and the first available User
category ID#. Saving at the program’s original factory ID# will replace the factory program, but
you can always return a factory ROM program to it’s original settings by deleting the program
at that ID# (see
Delete on page 6-15.)
Updating A Previously Edited Program
If you are saving changes to a program that you have previously edited, the same ID# that the
edited program was saved with will automatically be selected, and you can simultaneously
press the - / + buttons (below the Alpha Wheel) to jump between selecting the program’s same
ID# and the first available User category ID#. If you wish to make an updated edit to a
previously edited program and replace the old version at the same ID#, pressing the Save
button
twice will have the same result as pressing the Save button and then the save soft button.