Kurzweil PC3LE6, Руководство музыканта, Страница: 132 / 296

7-68
Setup Mode
The Control Setup
The Control Setup
The control setup is a setup which defines the controller assignments for all programs in
Program mode (these assignments are the MIDI CC numbers that the PC3LE’s physical
controllers
send while in Program mode, not their destinations. Available destinations for each
program are listed in the Program Editor Parameters page.) The control setup is stored in setup
mode at ID# 126 and is named
Internal Voices . See the diagram below for a visual depiction of
of the Control Setup’s role while in Program Mode. Don’t edit the Control Setup unless you are
an advanced MIDI user and know what you’re doing, read below for details.
All factory ROM programs (and any user programs made before editing the control setup) use
the controller assignments of the default settings for the control setup. Because of this, editing
the control setup can “break” the Control Source assignments made for programs on the
Program Editor Parameters page. Since the PC3LE’s physical controllers will not be sending
their default MIDI CC’s, the program parameters that have their Control Source set as one of the
default MIDI CC’s will no longer be controlled by the PC3LE’s physical controllers. These
programs could be “fixed” by re-assigning the Control Source for each parameter so that they
are controlled by the new CC numbers set for the control setup.
Don’t edit the control setup unless you are an advanced MIDI user who needs to send specific
MIDI CC’s to external equipment. You can save multiple versions of a control setup by saving a
copy of an edited control setup to an available user ID#, and then copying the desired setup to
ID# 126 by saving the setup at ID# 126, and overwriting the existing setup saved at ID#126. You
can always recall the original control setup by deleting the setup stored at ID# 126. You can
delete a setup from within the Setup Editor by using the Delete soft button, see
Delete on page 7-64.
Program Mode
Control Sources
Parameters Page
Program
Program Editor
Setup Mode
Controllers Page
Setup ID#: 126: Internal Voices
Setup Editor
Controller: Knob 5
Dest: Ctrl C (MIDI CC 18)
PC3LE’s
Controllers
(Knob 5)
Reverb, 2 2/3’
Knob 5
Physical
(Sends MIDI CC 18
to control the
selected parameter)
Control Setup:
Examples Of How The Control Setup Defines The PC3LE’s Physical Controller
Assignments While In Program Mode:
Controller: SW Pedal 1
Dest: Sustain (MIDI CC 64)
Pedal SW1
Pedal 1
(Sends MIDI CC 64
to control the
selected parameter)
(Continues for
all controllers
except Pads.)