Key
Menu
Settings
Information
6.2.5.1
Menu: Operation
The Operation section contains all information required for operating the machine
and the process. This includes important process data (pressure, flow rate, etc.) as
well as current process states (input/output states).
The decision regarding which parameters are displayed on the main screen can be
influenced by a user who has the appropriate authorisation. The parameters to be
displayed on the main screen can be selected in the Settings menu.
6.2.5.1.1 Defining operating parameters in the start menu
The start menu appears on the PumpDrive display following the boot procedure. Up
to 20 operating parameters can be defined in the start menu via parameter
(3-1-3-1)
.
The locations or positions to be assigned are listed on the display as Selection 01
through Selection 20.
1.
Open parameter 3-1-3-1 in the Settings menu.
2.
Choose a blank selection row (e.g. Selection 01) using the arrow keys.
3.
Press OK.
4.
Select the operating parameter required from the list of possible operating
parameters.
5.
Press OK to confirm.
As soon as a parameter is defined, the relevant parameter is displayed in the start
menu.
The arrow keys can be used to display the different operating parameters. In a
multiple pump configuration, the operating parameters of the associated
PumpDrives can also be listed on the display of the active master control panel.
Table 38: Selectable operating parameters for the start menu
Parameter
Description
1-1-1-1
Total voltage supply time [h]
1-1-1-2
Operating hours counter [h]
1-1-1-3
Energy meter [kWh]
1-1-1-4
Number of starts
1-1-1-5
Reset energy meter
1-2-1-1
Power [kW]
1-2-1-2
Power [HP]
1-2-1-3
Motor voltage [V]
1-2-1-4
Frequency [Hz]
1-2-1-5
Motor current [A]
1-2-1-6
Speed [rpm]
1-3-1-1
Actual value without unit
1-3-1-2
Actual value in %
1-3-1-3
Setpoint without unit
1-3-1-4
Setpoint in %
1-3-1-5
Analog input 1 without unit
1-3-1-6
Analog input 2 without unit
1-3-1-7
Pressure P1
1-3-1-8
Pressure P2
1-3-1-9
Flow rate without unit
1-3-1-10
Flow rate in %
1-3-1-11
Temperature
6 Operation
44 of 162
PumpDrive
