Krone Comprima F 125 XC-1, Руководство по эксплуатации

Страница: 53 / 374

Safety
53
Pos: 27.51 /Überschriften/Überschriften 3/A-E/A/Anschlagpunkte @ 168\mod_1368430700205_78.docx @ 1453905 @ 3 @ 1
3.7.5 Stop Points
Pos: 27.52 /BA/Sicherheit/7. Gefahrenhinweise alt/Warnung - Anheben @ 168\mod_1368433456450_78.docx @ 1454049 @ @ 1
WARNING!
Danger from falling loads!
•
Never step or stay under suspended loads!
• Maintain an adequate safety distance from suspended loads.
• Before transportation, compare load capacity of slings and cranes and choose
transportation equipment with a sufficient degree of safety and lifting capacity.
• Prevent strong impacts and make sure that the machine does not become wedged!
Pos: 27.53 /BA/Wartung/Rundballenpresse/Anheben der Maschine F/V_Fortima @ 347\mod_1435312657293_78.docx @ 2615244 @ @ 1
The baler is equipped with three suspension points:
•
A suspension point is located in the front area of the drawbar.
• Two suspension points can be found rear on the yoke (right and left upper machine side).
Lifting
• Use a lifting traverse with a minimum load-bearing capacity (depending on the permitted
gross weight of the machine) (refer to Chapter entitled Introduction “Identification”)
• Close the tailgate
• Swivel the parking support (parking jack) into transport position
• Lift the pick-up
• Make certain all safety devices are locked
• Attach the chains of the lifting traverse to the four suspension points of the machine
• Make sure that the hooks of the chains are attached correctly on the suspension points
Pos: 27.54 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1