manualshive.com logo in svg

Krone Comprima F 125 XC-1, Руководство по эксплуатации

Поделиться
Скачать
Krone Comprima F 125 XC-1 Скачать руководство пользователя страница 172

Maintenance

 

 

172 

 

Pos: 47.1 /Überschriften/Überschriften 1/U-Z/Wartung @ 0\mod_1199883581050_78.docx @ 36685 @ 1 @ 1 

 

11 Maintenance 

 

Pos: 47.2 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der grundlegenden Sicherheitshinweise alte Form @ 254\mod_1397485793575_78.docx @ 1953347 @  @ 1 

 

 

WARNING! 
If the basic safety instructions are not followed, people may be seriously injured or 
killed.  

• 

To avoid accidents, the basic safety instructions in the chapter Safety must have been 
read and followed, see chapter Safety "Basic safety instructions". 

 

Pos: 47.3 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der Sicherheitsroutinen alte Form @ 273\mod_1404117435996_78.docx @ 2058712 @  @ 1 

 

 

WARNING! 
If the safety routines are not adhered to, people may be seriously injured or killed.  

• 

To avoid accidents, the safety routines in the chapter Safety must be read and followed, 
see chapter Safety "Safety routines". 

 

Pos: 47.4 /Überschriften/Überschriften 2/A-E/EErsatzteile @ 0\mod_1196782991234_78.docx @ 14927 @ 2 @ 1 

 

11.1 

Spare Parts  

Pos: 47.5 /BA/Sicherheit/7. Gefahrenhinweise alt/MähwerkeWARNUNG - Verwendung von nicht zugelassenen Ersatzteilen @ 308\mod_1417011577394_78.docx @ 2392925 @  @ 1 

 

 

Warning! - Using non-approved spare parts. 

Effect: Danger to life, serious injuries or loss of warranty claims as well as exclusion of liability 
• 

Use only authentic KRONE spare parts and accessories authorised by the manufacturer. 
The use of spare parts, accessories or additional equipment not manufactured, tested or 
approved by KRONE will exclude any liability for consequential damage. 

 

Pos: 47.6 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Comprima F 125 XC-1























































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды