Krone Comprima F 125 XC-1, Руководство по эксплуатации

Страница: 239 / 374

Placing in Storage
239
Pos: 55.7 /BA/Einlagerung/Einlagerung_Am Ende der Erntesaison_text-hinweis_Instandsetzungsarbeiten notieren @ 471\mod_1471932287828_78.docx @ 3184395 @ @ 1
Note
Write down all repair jobs which must be performed by the next harvest and arrange for them
to be done with sufficient lead time. Your KRONE dealer is better able to perform maintenance
service and any required repairs outside of harvest season.
Pos: 55.8 /Überschriften/Zwischenüberschriften/F-J/Isolierband auf die Bremsscheibe kleben @ 491\mod_1485357445718_78.docx @ 3296790 @ @ 1
Gluing insulating tape onto the brake disc
Pos: 55.9 /BA/Einlagerung/Modulgruppen/Rundballenpressen/Isolierband von der Bremsscheibe entfernen_Bild @ 491\mod_1485356417452_78.docx @ 3296725 @ @ 1
1
2
Fig. 200
Pos: 55.10 /BA/Einlagerung/Rundballenpressen/Einlagerung_Am Ende der Erntesaison_Bindematerialbremse Isolierband_text_ALLE RP @ 491\mod_1485357778318_78.docx @ 3296821 @ @ 1
• Mask the brake surface of the brake disc (2) with insulating tape (1) to prevent corrosion at
the wrapping material brake.
Pos: 55.11 /Überschriften/Überschriften 2/U-Z/VVor Beginn der neuen Saison @ 0\mod_1197386024448_78.docx @ 20081 @ 2 @ 1
15.2 Before the Start of the New Season
Pos: 55.12 /BA/Sicherheit/3. Sicherheitsroutinen/Maschine für Instandhaltungs-, Reparatur-, Wartungs- und Einstellarbeiten vorbereiten @ 272\mod_1403522290336_78.docx @ 2051115 @ @ 1
WARNING!
Risk of injury during repair, maintenance and adjustment work on the machine.
If the machine has not been shut down, the machine or machine parts may move
unintentionally. As a result, people may be seriously injured or killed.
If the machine is not supported securely, the machine or machine parts may roll, fall or drop. As
a result, people may be seriously injured or killed.
•
Before starting repair, maintenance and adjustment work, perform the following steps:
•
Shut down and safeguard the machine, see chapter Safety, "Shutting down and
safeguarding the machine".
• The raised machine or machine parts must be securely supported, see chapter Safety
"Securely supporting the raised machine and machine parts".
Pos: 55.13 /BA/Einlagerung/Rundballenpressen/Einlagerung_Vor Beginn der neuen Saison_Netzbremse Isolierband_ALLE RP @ 500\mod_1493371138167_78.docx @ 3438463 @ @ 1
• Pull off the insulating tape at the wrapping material brake, see chapter Initial
commissioning, "Preparing the wrapping material brake".
Pos: 55.14 /BA/Einlagerung/Rundballenpressen/Einlagerung_Vor Beginn der neuen Saison_Rundballenpressen @ 35\mod_1256135568894_78.docx @ 326871 @ @ 1
• Before placing the machine in service again, trigger a tying or wrapping process and run
through it manually. As you do, check the functions of the starting devices of the tying or
wrapping process.
• Grease all lubrication points and oil the chains. Wipe away grease that comes out of
lubrication points.
• Check the oil level in the main drive gearbox and top up if necessary.
• Check hydraulic hoses and lines for leaks and replace them if necessary.
• Check all screws to make certain they are tight or retighten them if necessary.
• Check all electrical connection cables and the lighting. Repair or replace if necessary.
• Check the entire setting of the machine and correct if necessary.
• Check the operating functions.
• Re-read the operating instructions thoroughly.
Pos: 55.15 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1