Krone Comprima F 125 XC-1, Руководство по эксплуатации

Страница: 148 / 374

Operation
148
Pos: 43.84.52.7 /Überschriften/Zwischenüberschriften/A-E/Endposition prüfen und einstellen @ 399\mod_1447255951304_78.docx @ 2829240 @ @ 1
Checking and setting end position
Pos: 43.84.52.8 /Beipacks/Rundballenpressen/Folienbindung/Modulgruppen Bremse / Spiralwalze/Endposition prüfen und einstellen_Bild @ 399\mod_1447255856289_78.docx @ 2829179 @ @ 1
COM00442
1
2
3
Fig. 122
Pos: 43.84.52.9 /Beipacks/Rundballenpressen/Folienbindung/Modulgruppen Bremse / Spiralwalze/Endposition prüfen und einstellen_Text_alle Comprima @ 353\mod_1437734650819_78.docx @ 2641838 @ @ 1
For the film tying version, the net rocker arm (1) must rest against the insulation of the pressing
shaft (2) in end position. For optimum film reception, check end position and set it, if necessary:
•
Open menu 10 “Manual Operation” in the terminal.
• Move net rocker arm (1) to the saved end position using the terminal.
• Switch off tractor and remove the ignition key.
• Check whether the spreading bracket (3) rests against the insulation of pressing shaft (2)
and the film jams between insulation and pressing shaft.
If not:
• Start
tractor.
• Open menu 15-1 “Sensor Test” in the terminal.
• Press the key until the spreading bracket (3) rests against the insulation of
pressing shaft (2) and the film jams between insulation and pressing shaft.
• Select key.
The set position will be saved. The icon appears in the upper line.
Pos: 43.84.53 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1